Our Products
OLEFINS
- Ethylene
- Propylene
- Butadiene
chemexa
ETHANOLAMINES
- Monoethanolamine
- Diethanolamine
- Triethanolamine
chemexa
ETHYLENEAMINE
- Ethylenediamine (EDA)
- Diethylenetriamine (DETA)
- Piperazine (PIP68)
chemexa
AROMATICS
- Phenol
- Styrene Monomer
- Acetone
- Benzene
- Additional Aromatics products such as Pygas, Anisole, Fuel Oils, etc., based on availability.
chemexa
CHLOR-ALKALI
- Ethylene Dichloride
- Caustic Soda
chemexa
GLYCOLS
- Monoethylene Glycol
- Diethylene Glycol
- Triethylene Glycol
chemexa
OXO ALCOHOLS & PERFORMANCE MONOMERS
- 2-Ethylhexanol
- Iso-butyraldehyde
- N-butanol
- Iso-butanol
- Dioctyl Phthalate
- Methyl Methacrylate
chemexa
POLYURETHANE
- TDI 0380
- MDI 2031
- Polyol 0656
- Polyol 0548
- Polyol 0434
- Polyol 1127
- Polyol 1132
- Polyol 1529
- O-TDA
chemexa
PROPYLENE OXIDE DERIVATIVES
- Propylene Oxide
- Propylene Glycol
chemexa
LINEAR ALPHA OLEFINS
- Butene-1
- Hexene-1 (C6)
- Octene-1 (C8)
- Decene-1 (C10)
- Dodecene-1 (C12)
- C14-C18
- C20+
chemexa
GASES
- Gaseous Nitrogen
- Liquid Nitrogen
- Gaseous Oxygen
- Liquid Oxygen
- Liquid Argon
- Gaseous Hydrogen
- Liquid Carbon Dioxide
- Crude Krypton
chemexa
OXYGENATES
- Methanol
- Methyl Tertiary Butyl Ether
- Methyl Tertiary Butyl Ether - TX
chemexa
BUTYL GLYCOL ETHER (BGE)
- Butoxy Glycol Ether (EB)
- Butoxy Di Glycol Ether (DB)
- Butoxy Tri Glycol Ether (BTG)
chemexa
ETHOXYLATES
- Polyethylene Glycol PEG 200
- Polyethylene Glycol PEG 300
- Polyethylene Glycol PEG 400
- Polyethylene Glycol PEG 400 Pharma
- Polyethylene Glycol PEG 600
- Polyethylene Glycol PEG 600 Pharma
- Natural Alcohol Ethoxylate L1
- Natural Alcohol Ethoxylate L2
- Natural Alcohol Ethoxylate L3
- Natural Alcohol Ethoxylate L7
- Natural Alcohol Ethoxylate L9
- Castor Oil Ethoxylate EL 30
- Castor Oil Ethoxylate EL 40
- Synthetic Alcohol Ethoxylate TA 5
- Synthetic Alcohol Ethoxylate TA 6
- Synthetic Alcohol Ethoxylate TA 7
- Synthetic Alcohol Ethoxylate TA 8
- Synthetic Alcohol Ethoxylate TA 9
- Synthetic Alcohol Ethoxylate TA 10
- Synthetic Alcohol Ethoxylate TA 3070
- Synthetic Alcohol Ethoxylate TA 4070
chemexa
Potash (KCl – Potassium Fertilizer)
Potash is the most widely used source of potassium in fertilization. It helps improve stem strength, water-use efficiency, and fruit quality in terms of size, color, and sweetness. It also enhances plant tolerance to stress and salinity.
It is commonly used in field and horticultural crops, including cereals, vegetables, and fruits such as wheat, barley, corn, potatoes, tomatoes, palms, and citrus — as well as medicinal and aromatic herbs like mint, chamomile, thyme, and basil.
Potash can be applied by broadcasting or through drip irrigation and fertigation.
chemexa
UREA (N46%)
Urea is the most popular and economical nitrogen fertilizer, with a nitrogen concentration of 46%—higher than any other solid fertilizer. Versatile and ideal for various environmental conditions, it is used on crops like wheat, barley, rice, and maize. Urea can be sprayed or used for fertigation and is typically applied at least three times during the growing season.
chemexa
DAP
Phosphate fertilizers, made by combining ammonia with phosphoric acid, include:
Diammonium Phosphate (DAP) (18-46): Used for wheat, barley, vegetables, and early-stage fruit orchard fertilization.
Monoammonium Phosphate (MAP) (11-52, 10-50): Supports crops like clover, wheat, and barley, especially in sandy soils.
chemexa
GRANULAR NPK
NPK 16-8-16+15S (Date Palm)
Developed specifically for Middle Eastern date palm trees after extensive research, this grade provides balanced primary and secondary nutrients for healthy growth and good harvests throughout the year.
NPK 11-29-19+6S (Tuber)
Used for tuber crops (e.g., potatoes, onions) and fruits (e.g., watermelon), this grade offers balanced nutrients to promote healthy growth and high yields.
NPK 18-18-5+9S (Vegetables)
Applied to a wide range of vegetables and green landscapes, this balanced fertilizer ensures homogeneity of primary and secondary nutrients, supporting healthy growth and harvests across seasons.
NPS 16-20-0+13S
A balanced fertilizer with nitrogen, phosphorus, and sulfur, suitable for sulfur-deficient soils and crops like maize, rice, and wheat. Predominantly used in Southeast Asia.
NPS 20-20-0+13S
Similar to NPS 16-20-0+13S, this grade is used in sulfur-deficient soils for crops like maize, rice, and wheat, with strong demand in India, Brazil, Turkey, and other markets.
NPS 19-38-0+13S
Originally developed for Ethiopia, this grade suits sulfur-deficient soils and crops like maize, rice, and wheat, with growing demand in other regions.
chemexa
PRODUCT APPLICATIONS
| Product | Main Applications |
|---|---|
| Linear Alpha Olefins | LLDPE, HDPE, Detergents, Lubricants, Oil Field Chemicals, Plasticizers |
| Iso-butyraldehyde | Paints & Coatings, Personal Care, Perfume |
| Dioctyl Phthalate | Cable & Wires, PVC Pipes, Hoses, Roofing Materials |
| N-Butanol | Paints & Coatings, Cosmetics, Leather, Perfumes |
| Ethanolamines | Industrial Cleaning Solutions, Lubricants, Surfactants & Detergents, Agriculture |
| Ethyleneamine | Construction, Metalworking, Refineries, Wood Preservatives, Pharmaceuticals |
| Butoxy Glycol Ether (BGE) | Active solvent for coatings, Coupling agent for cleaners, Solvent for pesticides |
| Ethoxylates | Personal Care & Cosmetics, Surfactants & Detergents, Textile, Paints |
| Propylene Oxide | Automotive, Furniture, Building Insulation, Textile lubricants & soaps |
| Propylene Glycol | Brake Fluid, Cutting Oils |
| P-xylene | Terephthalic Acid |
| Methyl Methacrylate | Acrylic Sheet, Molding Compounds, Paints & Coatings, Impact Modifier |
| Glycols | Polyester resins, Adhesives, Paints & Coatings, Textile, Paper, Leather, Antifreeze |
| Industrial Gases | Refining & Energy, Metallurgy, Healthcare, Glass, Electronics, Pulp & Paper |
| Methanol | Raw material for Formaldehyde, Acetic acid, Polyacetal, MTBE, etc. |
| MTBE | Fuel, Gasoline blending |
| Acetone | Synthetic Rubbers, Methyl Methacrylate, Personal Care, Textile, Surface Coatings |
| Phenol | Films & Adhesives, Pharmaceuticals, Azo dyes, Wood preservatives |
| Ethylene Dichloride | Plastics, PVC |
| Caustic Soda | Detergents, Water treatment, Paints, Chemical processes |
| Olefins | Chemicals Manufacturing, Polymer, Synthetic Rubbers |
| Styrene Monomer | Styrene homopolymers and copolymers, Packaging materials and sheets |
| Iso-butanol | Paints & Coatings, Personal Care, Perfume |
| 2-Ethylhexanol | Plasticizers, Adhesives |
| Polyurethane | Mattress and Furniture, Automotive, Home Appliances, Building and Constructions |
chemexa
Polymer Product Catalogue
HDPE (High-Density Polyethylene)
Blown Film
| Process | Grade | Melt Index (g/10 min, ASTM D-1238) | Density (g/cm³, ASTM D-1505) | Typical Application | Characteristics |
|---|---|---|---|---|---|
| Blown Film | F00952 | 0.05 (MI₂.₁₆) | 0.952 | Bags-on-roll, T-shirt bag, Shopping bag | Excellent processability, mechanical strength, TNPP-free additive |
| Blown Film | F01552 | 0.15 (MI₂.₁₆) | 0.952 | Strong strength military & technology, deep freeze bags | Excellent processability & drawdown |
| Blown Film | F04660 | 0.7 (MI₂.₁₆) | 0.961 | Core-layer in co-extruded film | Low gel, excellent water vapor barrier, high stiffness, good processability |
chemexa
Blow Molding
| Process | Grade | Melt Index (g/10 min, ASTM D-1238) | Density (g/cm³, ASTM D-1505) | Typical Application | Characteristics |
|---|---|---|---|---|---|
| Blow Molding | BOP45075 | 6.0 (MI₂.₁₆) | 0.945 | Intermediate Bulk Containers (IBC) | Good impact resistance, superior ESCR, good flowability, broad molecular weight distribution |
| Blow Molding | B5429 | 0.3 (MI₂.₁₆) | 0.954 | Small and medium size containers for household maintenance, Jerry Cans, Industrial liner | High stiffness, good impact strength, good flowability, excellent ESCR, mechanical strength |
| Blow Molding | B5429A | 0.3 (MI₂.₁₆) | 0.954 | Container for electronics, cosmetics | Antistatic grade to prevent dust |
| Blow Molding | B54600 | 0.0 (MI₂.₁₆) | 0.961 | Bottles for milk, high-energy products | Homopolymer with low smell, high rigidity, toughness, good processability |
| Blow Molding | B46604A | 0.7 (MI₂.₁₆) | 0.961 | Drinking water bottle | Homopolymer with outstanding organoleptic properties, high rigidity, toughness, good processability |
| Blow Molding | B546046LS | 0.7 (MI₂.₁₆) | 0.961 | Bottles for milk, fruit | Homopolymer with high toughness, good processability, meets purity and organoleptic specifications |
chemexa
Injection Molding
| Process | Grade | Melt Index (g/10 min, ASTM D-1238) | Density (g/cm³, ASTM D-1505) | Typical Application | Characteristics |
|---|---|---|---|---|---|
| Injection Molding | M40053S | 4 (MI₂.₁₆) | 0.953 | Bottle cap, case, crate, shipping containers, housewares | High stiffness, toughness, contains UV stabilizer |
| Injection Molding | M40055S | 4 (MI₂.₁₆) | 0.955 | Good impact resistance, good flowability, low warpage |
chemexa
Multimodal HDPE (Pipe Extrusion)
| Process | Grade | Melt Index (g/10 min, ASTM D-1238) | Density (g/cm³, ASTM D-1505) | Typical Application | Characteristics |
|---|---|---|---|---|---|
| Pipe Extrusion | P6006N | 0.23 (MI₅) | 0.959 | Gas, water, sewage pipes, corrugated & spiral pipes | Black, PE 100, multimodal, excellent ESCR |
| Pipe Extrusion | P6006NA | 0.23 (MI₅) | 0.959 | Natural, PE 4710, multimodal, excellent ESCR |
chemexa
LLDPE (Linear Low-Density Polyethylene)
Blown Film
| Process | Grade | Melt Index (g/10 min, ASTM D-1238) | Density (g/cm³, ASTM D-1505) | Typical Application | Characteristics |
|---|---|---|---|---|---|
| Blown Film | 518N/NJ | 0.5 | 0.918 | Heavy duty film, construction film | High strength, puncture resistance, J-TNPP free, no slip & antiblock |
| Blown Film | 118WJ | 1.0 | 0.918 | Frozen food, carrier bags, garbage bags, shipping sacks, drip laterals | High slip, high antiblock |
| Blown Film | 118LJ | 1.0 | 0.918 | Medium slip, high antiblock | |
| Blown Film | 118JJ | 1.0 | 0.918 | Medium slip, medium antiblock | |
| Blown Film | 118NJ | 1.0 | 0.918 | Without slip & antiblock | |
| Blown Film | 119NJ | 1.0 | 0.918 | Good puncture resistance, high speed, good hot tack properties | |
| Blown Film | 119JJ | 1.0 | 0.918 | ||
| Blown Film | 120WJ, 121WJ, 122WJ, 123WJ, 124WJ | 1.0 | 0.918 | High clarity thin film, laundry bags, bread bags | High clarity, high slip, antiblock |
| Blown Film | 125NJ, 219NJ, 222WJ | 2.0 | 0.918 | General purpose film, garment bag, garbage coextruded film | High slip, high antiblock |
| Blown Film | 6821NJ | 0.8 | 0.921 | Heavy duty shipping sacks, lamination films, ice & frozen food bags, stretch wrap films | Fractional melt index hexene copolymer, high toughness, puncture resistance, tear resistance |
chemexa
Cast Film
| Process | Grade | Melt Index (g/10 min, ASTM D-1238) | Density (g/cm³, ASTM D-1505) | Typical Application | Characteristics |
|---|---|---|---|---|---|
| Cast Film | 218B/BJ | 2.0 | 0.918 | Cling film, stretch films for manual and pallet wrap | Good thermal stability, optical property, puncture resistance, J-TNPP free |
| Cast Film | 222NJ | 2.2 | 0.921 | Hand and pallet stretch wrap film | Optimum thermal stability, excellent transparency, J-TNPP free |
| Cast Film | 2318B/BJ | 2.8 | 0.918 | Pallet wrap (pre-stretch), high performance draw | Hexene comonomer, excellent optical properties, toughness, puncture resistance, strength |
chemexa
Roto Molding
| Process | Grade | Melt Index (g/10 min, ASTM D-1238) | Density (g/cm³, ASTM D-1505) | Typical Application | Characteristics |
|---|---|---|---|---|---|
| Roto Molding | R50035 | 5 | 0.935 | General purpose rotomoulding for middle and inner layer | Good processability, mechanical properties, non-UV stabilized |
| Roto Molding | R50035E | 5 | 0.935 | Water tanks, industrial and agricultural tanks | Good mechanical properties, contains UV stabilizer |
| Roto Molding | R40039E | 3.5 | 0.939 | Large water tanks, industrial and agricultural containers | Excellent mechanical properties, high rigidity, toughness, good impact, UV-stabilized |
chemexa
Compound
| Process | Grade | Melt Index (g/10 min, ASTM D-1238) | Density (g/cm³, ASTM D-1505) | Typical Application | Characteristics |
|---|---|---|---|---|---|
| Compound | RGS0035 | 5 | 0.935 | Masterbatch/compounding | Powder for compounding with pigments |
| Compound | MG200024 | 20 | 0.924 | Powder form, stabilized, high flowability | |
| Compound | MG500026 | 50 | 0.926 | ||
| Compound | 318B | 2.8 | 0.918 | Granule, silane compound |
chemexa
Pipe
| Process | Grade | Melt Index (g/10 min, ASTM D-1238) | Density (g/cm³, ASTM D-1505) | Typical Application | Characteristics |
|---|---|---|---|---|---|
| Pipe | P438J | 0.4 (MI₂.₁₆) | 0.938 | Cylindrical and tape drip irrigation pipes | Excellent processability, high consistency, exceptional mechanical properties, stress crack resistance |
chemexa
LDPE (Low-Density Polyethylene)
Note: No specific data provided for LDPE grades. Placeholder for potential content.
PMMA (Polymethyl Methacrylate)
| Process | Grade | Melt Index (g/10 min) | Density (g/cm³) | Typical Application | Characteristics |
|---|---|---|---|---|---|
| Extrusion, Thermoforming | P150E | 1.5 ± 0.5 | 1.19 | Optical extrusion, syringe, display, sound barrier, panels, profiles, pipes | Optical extrusion grade, low foreign matter counts, excellent transparency |
| Extrusion, Thermoforming | 17OP | 1.7 ± 0.4 | 1.19 | Monitor LGP (Light Guide Plate) for TVs and LCDs | Optical LGP extrusion grade, low foreign matter counts, excellent UV performance |
| Extrusion, Thermoforming | 20HR | 2 ± 0.3 | 1.19 | Tail light | Heat resistance grade, high deflection temperature, Vicat softening temp ≥ 105°C |
| Extrusion, Thermoforming | P20MMH | 2 ± 0.7 | 1.19 | Automotive tail lights, optical extrusion, sheets, pipes, rods | Heat resistance grade, high deflection temperature, Vicat softening temp ≥ 107°C, excellent processability, weather resistance |
| Extrusion, Thermoforming | 23SP | 2.3 ± 0.5 | 1.19 | Signage, outdoor usage | Special extrusion grade, high deflection temperature, electrical resistance |
| Molding | 60MS | 6 ± 1.5 | 1.19 | Household/tablewares, decorative parts, cosmetics packaging, automotive | Medium flow PMMA grade, balanced melt processability, weather resistance |
| Molding | 140HF | 14 ± 2 | 1.19 | Salad bowl | Easy flowing grade, high moldability |
chemexa
POM (Polyoxymethylene Copolymer)
| Process | Grade | Melt Index (g/10 min) | Density (g/cm³) | Typical Application | Characteristics |
|---|---|---|---|---|---|
| Extrusion, Molding | 30RE | 2.8 ± 0.5 | 1.41 | Thick-walled, void-free parts, extruded stock shapes | Stiff-flowing copolymer POM, good chemical resistance, hydrolysis resistance |
| Extrusion, Molding | 30S | 3 ± 0.5 | 1.41 | Thick-walled parts, automotive parts, tubing | Stiff-flowing copolymer POM, high tracking resistance |
| Extrusion, Molding | 40S | 9 ± 1 | 1.41 | Plumbing, camera gears, toys | General purpose, high rigidity, toughness, hardness |
| Extrusion, Molding | 140S | 14 ± 1.5 | 1.41 | Precision parts, thin-walled systems, zippers | Easy-flowing, high rigidity, toughness, hardness |
| Extrusion, Molding | 280S | 27 ± 3 | 1.41 | Complicated, thin-walled moldings, sprinkler systems, shower heads | Very easy-flowing, high rigidity, hardness |
| Extrusion, Molding | 460S | 45 ± 4 | 1.41 | Complicated, thin-walled precision parts, water flow meter | Extremely easy-flowing, intricate flow-path, shorter cycle times |
chemexa
POLYAMIDE 6
| Process | Grade | Relative Viscosity (ISO 307) | Water Content (% w/w, ASTM D6869) | Typical Application | Characteristics |
|---|---|---|---|---|---|
| Extrusion | 30RE | 2.8 ± 0.5 | 1.41 | Thick-walled, void-free molded parts, extruded stock shapes | Stiff-flowing copolymer POM, good chemical resistance, hydrolysis resistance |